make[1]: Entering directory '/srv/build/amery/sunxi/sunxi-nightly/build_linux-next-multi_v7'
  GEN     ./Makefile
#
# configuration written to .config
#
make[1]: Leaving directory '/srv/build/amery/sunxi/sunxi-nightly/build_linux-next-multi_v7'
make[1]: Entering directory '/srv/build/amery/sunxi/sunxi-nightly/build_linux-next-multi_v7'
  GEN     ./Makefile
scripts/kconfig/conf  --silentoldconfig Kconfig
  CHK     include/config/kernel.release
  GEN     ./Makefile
  CHK     include/generated/uapi/linux/version.h
  UPD     include/config/kernel.release
  Using /srv/build/amery/sunxi/sunxi-nightly/linux-sunxi-next as source for kernel
  CHK     include/generated/utsrelease.h
  UPD     include/generated/utsrelease.h
  CHK     include/generated/timeconst.h
  CHK     include/generated/bounds.h
  CHK     include/generated/asm-offsets.h
  CALL    /srv/build/amery/sunxi/sunxi-nightly/linux-sunxi-next/scripts/checksyscalls.sh
  CHK     include/generated/compile.h
  CC      init/version.o
  LD      init/built-in.o
  CC      arch/arm/mach-tegra/tegra.o
  CC      kernel/sys.o
  LD      arch/arm/mach-tegra/built-in.o
  CC      drivers/ata/ahci.o
  CC      drivers/ata/libahci.o
  CC      arch/arm/mach-omap2/usb-host.o
  CC      drivers/base/firmware_class.o
  CC      arch/arm/mach-omap2/twl-common.o
  LD      drivers/base/built-in.o
  LD      arch/arm/mach-omap2/built-in.o
  CC      drivers/ata/ahci_platform.o
  CC      drivers/ata/libahci_platform.o
  CC      kernel/module.o
  CC      drivers/ata/sata_highbank.o
  CC      drivers/ata/ahci_brcm.o
  CC      drivers/ata/ahci_sunxi.o
  CC      drivers/ata/ahci_st.o
  CC      drivers/ata/ahci_tegra.o
  CC      drivers/ata/sata_mv.o
  CC      drivers/clocksource/timer-atmel-pit.o
  CC      drivers/clocksource/sh_mtu2.o
  CC      drivers/clocksource/sh_tmu.o
/srv/build/amery/sunxi/sunxi-nightly/linux-sunxi-next/drivers/clocksource/timer-atmel-pit.c: In function 'at91sam926x_pit_dt_init':
/srv/build/amery/sunxi/sunxi-nightly/linux-sunxi-next/drivers/clocksource/timer-atmel-pit.c:264:2: error: 'ret' undeclared (first use in this function)
  ret = clk_prepare_enable(data->mck);
  ^
/srv/build/amery/sunxi/sunxi-nightly/linux-sunxi-next/drivers/clocksource/timer-atmel-pit.c:264:2: note: each undeclared identifier is reported only once for each function it appears in
/srv/build/amery/sunxi/sunxi-nightly/linux-sunxi-next/scripts/Makefile.build:289: recipe for target 'drivers/clocksource/timer-atmel-pit.o' failed
make[3]: *** [drivers/clocksource/timer-atmel-pit.o] Error 1
make[3]: *** Waiting for unfinished jobs....
  CC      drivers/extcon/extcon.o
  CC      drivers/extcon/devres.o
  LD      kernel/built-in.o
  CC      drivers/edac/edac_stub.o
  CC      drivers/edac/edac_mc.o
  CC      drivers/edac/edac_device.o
/srv/build/amery/sunxi/sunxi-nightly/linux-sunxi-next/scripts/Makefile.build:440: recipe for target 'drivers/clocksource' failed
make[2]: *** [drivers/clocksource] Error 2
make[2]: *** Waiting for unfinished jobs....
  CC      drivers/edac/edac_mc_sysfs.o
  CC      drivers/edac/edac_module.o
  CC      drivers/edac/edac_device_sysfs.o
  LD      drivers/ata/built-in.o
  LD      drivers/extcon/extcon-core.o
  LD      drivers/extcon/built-in.o
  CC      drivers/edac/wq.o
  CC      drivers/edac/edac_pci.o
  CC      drivers/edac/edac_pci_sysfs.o
  CC      drivers/edac/highbank_mc_edac.o
  CC      drivers/edac/highbank_l2_edac.o
  LD      drivers/edac/edac_core.o
  LD      drivers/edac/built-in.o
/srv/build/amery/sunxi/sunxi-nightly/linux-sunxi-next/Makefile:968: recipe for target 'drivers' failed
make[1]: *** [drivers] Error 2
make[1]: Leaving directory '/srv/build/amery/sunxi/sunxi-nightly/build_linux-next-multi_v7'
Makefile:150: recipe for target 'sub-make' failed
make: *** [sub-make] Error 2